HTJ-1050

Njirimara nke igwe na-ekpo ọkụ na-ekpo ọkụ akpaaka

Nkọwa dị mkpirikpi:

HTJ-1050 Automatic Hot Stamping Machine bụ ezigbo akụrụngwa maka usoro stamping ọkụ nke SHANHE MACHINE mere. Ndebanye aha dị elu, ọsọ mmepụta dị elu, ihe ndị dị ala, mmetụta stamping dị mma, nrụgide embossing dị elu, arụmọrụ kwụsiri ike, ọrụ dị mfe na mmepụta mmepụta dị elu bụ uru ya.


Nkọwa ngwaahịa

Mkpado ngwaahịa

Njirimara nkeIgwe stampụ ọkụ akpaaka,
Igwe stampụ ọkụ akpaaka,

Ihe ngosi ngwaahịa

Nkọwapụta

HTJ-1050

Oke. nha akwụkwọ (mm) 1060(W) x 760(L)
Min. nha akwụkwọ (mm) 400(W) x 360(L)
Oke. nha stamping (mm) 1040(W) x 720(L)
Oke. nha ọnwụ anwụ (mm) 1050(W) x 750(L)
Oke. ọsọ stamping (pcs/h.) 6500 (dabere na nhazi akwụkwọ)
Oke. ọsọ ọsọ (pcs / h.) 7800
Nkọwa stampụ (mm) ±0.09
Ọnọdụ okpomọkụ (℃) 0 ~ 200
Oke. mgbali (ton) 450
Ọkpụrụkpụ akwụkwọ (mm) kaadiboodu: 0.1-2; Bọdụ corrugated: ≤4
Ụzọ nnyefe foil 3 ogologo foil nri aro; 2 transversal foil nri aro
Ngụkọta ike(kw) 46
Ibu(ton) 20
Nha (mm) Agụnyeghị pedal ọrụ yana akụkụ akpakọba ihe: 6500 × 2750 × 2510
Gụnye pedal ọrụ na akụkụ akpakọba ụzọ: 7800 × 4100 × 2510
Ikuku compressor ike ≧0.25 ㎡/min, ≧0.6mpa
Ogo ike 380± 5% VAC

Nkọwa

① Igwe na-ekpo ọkụ na-ekpo ọkụ nke ise-axis mejupụtara 3 longitudinal foil feed shafts na 2 transversal foil feed shafts.

② Foil ewepụtara n'ogologo: moto servo atọ kwụụrụ onwe ya na-ebufe foil. A na-eji nchịkọta foil
ma n'ime ma n'èzí na-anakọta ụzọ. Nchịkọta dị n'èzí nwere ike ịdọpụ ihe mkpofu ahụ ozugbo n'èzí igwe. Mpempe ahịhịa ahịhịa adịghị mfe ịdọrọ foil ọla edo gbajiri agbaji, nke dị mma ma bụrụ nke a pụrụ ịdabere na ya, na-eme ka nrụpụta nrụpụta dị ukwuu ma na-ebelata oke ọrụ nke ndị ọrụ. A na-ejikarị nchịkọta dị n'ime ya eme ihe maka aluminom anodized buru ibu.

③ Foil a na-ebuga n'okporo ụzọ ụzọ: igwe igwe servo abụọ nọọrọ onwe ha na-ebufe foil. Enwekwara moto servo nke nọọrọ onwe ya maka nchịkọta foil na mweghachi foil efu efu.

④ Akụkụ ikpo ọkụ na-eji mpaghara njikwa okpomọkụ nke onwe 12 maka njikwa ziri ezi n'okpuru ọnọdụ PID. Ya max okpomọkụ nwere ike iru ruo 200 ℃.

⑤ Nabata onye na-ahụ maka ngagharị (TRIO, England), njikwa kaadị axis pụrụ iche:
Enwere ụdị stamping atọ: ịwụ elu edo, ịwụ elu na-adịghị mma na ntọala ntuziaka, a na-agbakọ jumps abụọ mbụ site na kọmpụta nke ọma, nke enwere ike ịrụ ọrụ sistemụ niile na ihuenyo mmetụ maka ịgbanwe na ịtọlite ​​​​.

⑥ Kpọmkwem ternary cam cutter nke nwere usoro kachasị mma nke kọmpụta nyere na-eme ka ogwe gripper rụọ ọrụ n'ọnọdụ kwụsiri ike; si otú nwere a elu anwụ ọnwụ nkenke na a inogide ndụ. A na-eji ihe ntụgharị ugboro ugboro maka ịchịkwa ọsọ; ọ nwere obere mkpọtụ, arụ ọrụ kwụsiri ike na obere oriri.

⑦ Ihe niile na-ahụ maka eletriki eletrik, ihe ọkọlọtọ ọkọlọtọ na akụkụ ọnọdụ isi nke igwe sitere na ụdị ama ama mba ụwa.

⑧ Igwe na-anabata ọrụ mmemme multipoint na HMI na akụkụ njikwa nke a pụrụ ịdabere na ya nke ukwuu ma na-agbatị ndụ ọrụ igwe. Ọ na-arụ ọrụ akpaaka nke usoro ahụ dum (gụnyere nri, stamping ọkụ, stacking, agụta na debugging, wdg), nke HMI na-eme ka debugging dịkwuo mfe na ngwa ngwa.


  • Nke gara aga:
  • Osote: