search
English
banner10(1)
HBF-3/1450/1700/2200 Mai Haɓakawa Mai Saurin sarewa Laminator tare da Fitar da Hoton Flip Flop Stacker
  • HBF-3/1450/1700/2200 Smart High Speed ​​​​Flut Laminator tare da Flip Flop Stacker

HBF-3/1450/1700/2200 Smart High Speed ​​​​Flut Laminator tare da Flip Flop Stacker

Takaitaccen Bayani:

HBF-3 shine samfurin mu na ƙarni na 3 na laminator mai saurin sarewa. Max. gudun shine mita 200 / min, wanda ke ƙara yawan aikin samarwa. Ƙa'idodin lantarki na Turai yana tabbatar da ingantaccen aiki da kwanciyar hankali. Mai sarrafa motsi na Parker na Amurka, SIEMENS PLC na Jamus, firikwensin P+F na Jamus, yana tabbatar da cikakken lamination mai sauri da daidai. Girman diamita na corrugation ciyar nadi, bakin karfe shafi abin nadi da latsa abin nadi, sa lamination tsakanin bugu takarda da kasa takarda mafi kyau.


Cikakken Bayani

Tags samfurin

KYAUTATA NUNA

Ƙayyadaddun bayanai

HBF-3/1450
Max. girman takarda

1450×1450 mm
Min. girman takarda

360×380 mm
Babban kauri

128g/㎡-450 g/㎡
Kaurin takarda na ƙasa

0.5-10 mm
Sheet zuwa lamination: 250+gsm
Max. gudun aiki

200 m/min
Kuskuren lamination

± 0.5 - ± 1.0 mm
Ƙarfin injin

Nau'in jagora: 28.75kw

Nau'in bel: 30.45kw
Ikon gaske

Nau'in jagora: 25.75kw

Nau'in bel: 27.45kw
Girman inji(L×W×H)

22248×3257×2988mm
Nauyin inji

7500 kg + 4800 kg

HBF-3/1700
Max. girman takarda

1700×1650 mm
Min. girman takarda

360×380 mm
Babban kauri

128g/㎡-450 g/㎡
Kaurin takarda na ƙasa

0.5-10 mm

Sheet zuwa lamination: 250+gsm
Max. gudun aiki

200 m/min
Kuskuren lamination

± 0.5 - ± 1.0 mm
Ƙarfin injin

Nau'in jagora: 31.3kw

Nau'in bel: 36.7kw
Ikon gaske

Nau'in jagora: 28.3kw

Nau'in bel: 33.7kw
Girman inji (L×W×H)

24182×3457×2988 mm
Nauyin inji

8500 kg + 5800 kg

HBF-3/2200
Max. girman takarda

2200 × 1650 mm
Min. girman takarda

380×400 mm
Babban kauri

128 g/m²-450 g/m²
Kaurin takarda na ƙasa

Jirgin katako
Max. gudun aiki

200 m/min
Kuskuren lamination

± 1.5 mm
Ƙarfin injin

Nau'in jagora: 36.3kw

Nau'in bel: 41.7kw
Ikon gaske

Nau'in jagora: 33.3kw

Nau'in bel: 38.7kw
Girman inji (L×W×H)

24047×3957×2987 mm
Nauyin inji

10500 kg + 6000 kg

Siffofin

Max. gudun shine 20,000 pcs/hr.

Sarrafa taɓawa ɗaya, babban madaidaicin saurin gudu.

Matsayin EU, amintaccen aiki.

Ya shafi lamination tsakanin m buga takarda da corrugated allon (A/B/C/E/F/G- sarewa, sarewa biyu, 3 yadudduka, 4 yadudduka, 5 yadudduka, 7 yadudduka), kwali ko launin toka allo, da kuma dace. don "lamination sandwich".

Injin Generation na 3 Ya zo da Sabbin ayyuka:
Shigarwar dijital. Fara taɓawa ɗaya ya haɗa da:
A. Pre-loading part daidaitawa
B. Feeder's FWD & BWD daidaitawa
C. Girman takarda na saman
D. Girman takarda na ƙasa
E. Daidaita matsa lamba ta atomatik
F. Daidaita adadin manne
G. Servo matsayi
H. Saitin nesa na takarda
I. Latsa ɓangaren FWD & daidaitawar BWD
J. Takarda stacker daidaita haɗin gwiwa
K. Nunin kuskure
L. Tsarin lubrication na kai
Da gaske gane aikin digitization, bayanai, gani.

acsdv (1)

Girman dia. bakin karfe abin nadi

acsdv (2)

Babban mai ciyar da Servo, daidaitawa ta atomatik

aksdv (3)

Mai jigilar jagorar Servo, babban tsotsa

aksdv (4)

Servo bel conveyor

aiki (6)

Haɗin fara taɓawa ɗaya tare da stacker

aksdv (5)

Tsari mai ɗaure biyu, tsawaita rayuwa

61

Matsa lamba ta atomatik & manne adadin daidaita tsarin

aiki (7)

Tsarin lubrication na atomatik

Cikakken Bayanin Laminator

A. Cikakken tsarin sarrafa wutar lantarki na atomatik

Mai kula da motsi na Parker na Amurka tare da sarrafa atomatik na PLC, mai kula da wuri mai nisa da motar servo yana ba ma'aikaci damar saita girman takarda akan allon taɓawa kuma daidaita saman takardar da matsayi na aikawa ta atomatik. Sanda mai dunƙule layin dogo mai zamiya da aka shigo da ita yana sanya madaidaicin matsayi; sashin latsa kuma yana da na'ura mai sarrafa nesa don sarrafa inci na FWD & BWD. Na'ura tana da aikin ajiyar ƙwaƙwalwar ajiya don tunawa da kowane samfurin da kuka ajiye. HBZ-3 ya kai ga aiki da kai na gaskiya tare da cikakken aiki, ƙarancin amfani, aiki mai sauƙi da daidaitawa mai ƙarfi.

B. Kayan lantarki

● Shanhe Machine matsayi model HBZ-3 a kan Turai inji masana'antu misali. Duk injin ɗin yana amfani da sanannun samfuran duniya, kamar PARKER (Amurka), MAC (Amurka), P+F (GER), SIEMENS (GER), BECKER (GER), OMRON (JPN), YASKAWA (JPN), SCHNEIDER ( FRA). Haɗaɗɗen sarrafawar PLC tare da shirinmu na haɗe-haɗe suna fahimtar sarrafa mechatronics don sauƙaƙe matakan aiki da adana farashin aiki.
● Injin yana ɗaukar mai sarrafa motsi (Parker, Amurka) don cimma nasarar watsa siginar kai tsaye ba tare da tsangwama ba, kwanciyar hankali da daidaito.
● PLC (SIEMENS, Jamus) daidaitaccen iko, lokacin da takardar ƙasa ba ta fito ba ko mai ba da abinci ya aika da zanen gado biyu, babban injin zai tsaya don rage asarar. Fiye da shekaru 30 na ƙwarewar samarwa a cikin injin laminating yana sa tsarin shirin ya fi kwanciyar hankali kuma madaidaicin laminating ya fi girma.
● Na'urar tana amfani da na'urar gano hoto (P + F, Jamus), wanda ba shi da buƙatun akan launi na saman takarda da takardar ƙasa. Baƙi kuma za a iya gane shi.

karanta (9)
1

C. Mai ciyarwa

● Bincike mai zaman kansa da haɓaka samfuran haƙƙin mallaka: Feeder. Tare da ƙirar babban mai ba da firinta na ƙarshe, na'urar ciyar da takarda ce ta ƙarfafa tare da ingantaccen tsotsa takarda, ciyar da takarda santsi. Max. Gudun ciyar da takarda na feeder shine 20,000 inji mai kwakwalwa / awa.
● Gudanar da wutar lantarki ta atomatik. Feeder zai isa wurin ta atomatik bayan shigar da girman takarda akan allon taɓawa kuma yayi daidai. An inganta babban bututun bututun bututun mai musamman don takarda mai kaifi.

D. Dual-way of top sheet loading

● Za'a iya tura duk tarin takarda na takarda a cikin mai ba da takarda ba tare da waƙa ba, wanda ya dace da dukan takarda na manyan kayan takarda.
● Ana iya shirya takarda da kyau a wajen injin, sannan a tura shi cikin takarda tare da waƙar, wanda ya sa ta zama daidai kuma mai kyau.
● Daidaitawa yana da aikin "daidaitawar lantarki ta atomatik". An sanye shi da nau'in gantry pre-loading dandamali, sarari da lokaci an bar su don shirya lodin takarda don tabbatar da amincin ma'aikata. Yana samun babban aiki mai inganci.

zama (11)
zama (12)

E. Bangaren isar da takarda na ƙasa (Na zaɓi)

●Nau'in gefen jagora (Motar servo ne ke tafiyar da ƙafafun rana tare da tsotsawar iska mai ƙarfi):

Ana sarrafa shi ta hanyar servo na musamman, kuma manyan kwararar iska mai hura wutar lantarki da ƙarar juzu'in ciyar da takarda sun fi dacewa ga isar da takarda mai laushi, m, nauyi da girman girman takarda. Ƙirar dalla-dalla da aka yi niyya: Kowane dabaran roba mai ciyarwa tana sanye take da ɗakuna guda ɗaya don tabbatar da ingantaccen bayarwa da ingantaccen ciyarwa. Takardar feed roba dabaran yana da tsawon rayuwar sabis, wanda zai iya kaiwa shekaru 5-10, ta haka zai rage ƙarfin aiki na maye gurbin motar roba da farashin tallace-tallace. Irin wannan nau'in ya dace da kowane katako na katako, kuma ya fi dacewa da laminating kwali da yawa.

Na zaɓi: Za a iya ƙara silinda mai dacewa don buga takarda kuma tabbatar da cewa takarda ta ƙasa tana da kyau.

Haɓaka motar daidaitawa mai zaman kanta, wato, takarda na ƙasa za ta kasance ta atomatik ta atomatik, kuma za'a iya daidaita shi da kansa ta gefen dama, wanda ya dace don magance matsalar cewa takarda na kasa ba ta cika ka'idoji ba.

● Nau'in isar da bel (motar servo ne ke motsa belt mai ƙarfi tare da tsotsawar iska):

Ƙaƙƙarfan bel ɗin da aka ɗora ana jigilar shi cikin sauƙi, wanda ya dace da lamination tsakanin takarda mai launi da katako (F/G-flute), kwali da allon launin toka. Ba za a tozarta takardar ƙasa yayin isar da sako ba.

zama (13)
zama (14)

F. Wurin ɓangaren takardar ƙasa (Na zaɓi)

● Nau'in na yau da kullun, tsayin sararin samaniya shine mita 2.2, wanda shine ƙarin ceton sarari.
● Nau'in da aka haɓaka, tsayin sararin samaniya shine mita 3, wanda ya dace da kaya, tarawa da aiki na babban takarda na kasa.

G. Tuki tsarin

● Muna amfani da bel na lokaci da aka shigo da su maimakon sarkar dabarar dabarar gargajiya don magance matsalar rashin daidaituwa tsakanin takarda na sama da takardar ƙasa saboda sarkar da ta ƙare da kuma sarrafa kuskuren lamination a cikin ± 1.0mm, don haka cika cikakkiyar lamination.
● Duk nau'i-nau'i a gefen hagu da dama na ɓangaren lamination an inganta su zuwa tsari mai nau'i biyu, wanda zai iya tsawaita rayuwar sabis ɗin yadda ya kamata. Tare da tsarin samar da man fetur na atomatik, yana da sauƙi don kula da na'ura, kuma nauyin ba shi da sauƙi don lalacewa.
● Tsarin ƙarfafawa: farantin bango na laminator na sarewa yana kauri zuwa 35mm, kuma duka injin yana da nauyi don tabbatar da aiki mai sauri da kwanciyar hankali.

zama (15)
2
3

H. Ƙara diamita na tsarin suturar manne (Na zaɓi)

Ƙara diamita na abin nadi mai rufi. Domin tabbatar da cewa an lulluɓe manne daidai ba tare da fantsama da ɓata lokaci ba yayin gudu mai sauri, SHANHE MACHINE yana tsara tsarin suturar manne wanda ke amfani da abin nadi na bakin karfe. Tsarin rhombic na musamman shine don suturar manne akan takarda, wanda ke adana amfani da manne kuma yana rage abun cikin ruwa na samfuran laminated, yana da matukar dacewa don yin takarda zuwa takarda. Na'urar toshe manne ta musamman da kyau tana magance matsalar fantsama da tashi. Na'urar mai cika manne ta atomatik tare da tsarin sake yin fa'ida na manne na iya guje wa ɓarna manne. Tabbatar cewa samfuran' taurin kuma ba su da alaƙa.

Cikakkun Takardun Takarda A tsaye

LFS-145/170/220 Tsayayyen Takarda Stacker shine don haɗawa tare da laminator sarewa don gane aikin tara takarda ta atomatik. Yana tattara samfuran lamination da aka gama a cikin tari daidai da adadin saiti. Na'ura tana haɗa ayyukan jujjuya takarda ta lokaci-lokaci, tara takarda a gefen gaba zuwa sama ko ta baya sama da tsararrun tari, da dai sauransu. Har yanzu, ya taimaka wa kamfanoni da yawa na bugawa da marufi don magance matsalar ƙarancin aiki, inganta yanayin aiki, adanawa. aiki mai tsanani kuma yana ƙara yawan fitarwa.

acsdvb (1)

LFS-145/170/220 Tsayayyen Takarda Takarda, tare da aikin Fara taɓawa ɗaya, babu buƙatar mai aiki don daidaitawa. Ana ƙara ɓangaren isarwa don sauyi mai sauƙi. Kafin takarda ta je sashin jujjuyawa, za a yi fentin takarda a kowane bangare hudu. Naúrar jujjuyawa na iya saitawa akan kwamfutar don juzu'i ɗaya, juzu'i biyu ko babu juzu'i. Bayan an tattara takarda a cikin tari, na'ura za ta buga kararrawa kuma ta fitar da tulin daga cikin tari, sannan ma'aikacin zai iya amfani da jakin pallet don matsar da tarin.

A. Haɗe-haɗe sarrafawa: sarewa laminator iko takarda stacker, taɓawa ɗaya farawa

Shigar da girman takarda akan allon taɓawa na laminator ɗin sarewa, kuma za'a iya haɗa takin takarda nan da nan. Kowane allo patting takarda da wurin toshe na iya isa wurinsa a lokaci guda. Har ila yau, tarin takarda yana da allon taɓawa mai zaman kansa, HMI, mai sauƙin koya. SHANHE yana neman ƙara aiki na dijital da haɓaka ikon sarrafa hankali akan injunan balagagge, don haka rage buƙatun ga masu aiki.

B. Bangaren isar da canji (Na zaɓi)

Wannan ɓangaren yana da nau'in silinda da nau'in nau'in nau'in motsi, kuma ana shigar da ɓangaren isar da canji tsakanin ɓangaren latsawa da tarar takarda don cimma nasarar rabuwar takarda. Mai aiki zai iya cire takardar sharar gida a wannan lokaci don ƙara ingancin samfur. Hakanan za'a iya cire wannan ɓangaren kuma a canza shi zuwa tattarawa da hannu.

acsdvb (2)
csdvb (3)

C. Canjin saurin sarrafa servo mataki uku

● Bayan takarda ta bar sashin latsawa, saboda takarda ta mamaye, dole ne a raba takardar. An ƙera gabaɗayan isar da jigilar kaya zuwa saurin lokaci uku don samfuran tsayin corrugation daban-daban. Cikakken rarraba.
● Kuna iya daidaita tsayin takarda mai jujjuyawa (Max. 150mm) don yanke shawarar adadin kowane juzu'i, ta hanyar isa ga adadin, za a aika takarda zuwa sashin jujjuyawa ta atomatik.
● Yana murɗa takarda daga gaba da gefe biyu don sanya takardar ta taru da kyau.
● Madaidaicin matsayi dangane da fasahar mitar mai canzawa. Tura takarda mara juriya.

D. Servo iko

  • Yi amfani da mai sauya mitar don tura takarda ciki; Juyawa naúrar tana amfani da sarrafa motar servo.
aksdvb (4)

E. Sashen Tallafawa

● Matsayi na baya, da takarda takarda daga bangarorin 3: gefen gaba, gefen hagu da dama. Tabbatar da tara oda.

● Na'urar riga-kafi don isarwa mara tsayawa. Tsawon tari na takarda yana daidaitawa tsakanin 1400mm zuwa 1750mm.

F. Sashen Isarwa (Na zaɓi)

Ayyukan pallet ɗin ƙarin ta atomatik. Lokacin da aka fitar da dukkan allo ta atomatik daga cikin tari, ana ƙara ƙarar pallet ɗin ta atomatik kuma ta ɗaga kai tsaye, kuma injin yana ci gaba da karɓar takarda.

  • Tsarin dabaru, na iya ƙara tambarin takarda ta atomatik, fitar da tulin takarda lokacin da ta cika, kuma yayi amfani da jack jack don motsa ta. Hana isar da takarda ta makale ko faɗuwar tarin takarda.
  • Kariyar tsaro: idan masu aiki suka shiga cikin na'ura, injin zai sami faɗakarwar murya a cikin Ingilishi da kuma rufewa ta atomatik.
ACdvb (7)
aksdvb (6)
aksdvb (5)

G.Stacker lissafin iya aiki na bincike:

karanta (8)
karanta (9)
Lamination samfur 1450*1450 laminate Q'ty 1700*1650 laminate Q'ty 2200*1650 laminate Q'ty
Single E/F- sarewa

9000-14800 inji mai kwakwalwa/h

7000-12000 inji mai kwakwalwa/h

8000-11000 inji mai kwakwalwa/h
Single B- sarewa

8500-10000 inji mai kwakwalwa/h

7000-9000 inji mai kwakwalwa/h

7000-8000 inji mai kwakwalwa/h
Sau biyu E- sarewa

8500-10000 inji mai kwakwalwa/h

7000-9000 inji mai kwakwalwa/h

7000-8000 inji mai kwakwalwa/h
5-ply BE- sarewa

7000-8000 inji mai kwakwalwa/h

6000-7500 inji mai kwakwalwa/h

5500-6500 inji mai kwakwalwa/h
5-ply BC- sarewa

5500-6000 inji mai kwakwalwa/h

4000-5500 inji mai kwakwalwa/h

4000-4500 inji mai kwakwalwa/h
Lura: saurin stacker ya dogara ne akan ainihin kauri na allunan takarda. Kowane stacking kauri daga 0 zuwa 150mm. Wannan bincike ya dogara ne akan lissafi na ka'idar. Idan allunan sun yi yawa sosai, adadin takarda na iya zama ƙasa da ƙasa.
  • Na baya:
  • Na gaba:

    • samfurori masu dangantaka

    Danna shiga don bincika ko ESC don rufewa